The mountains marking solution

Key words: mountain, mountain roads, hot melt, normal temperature, cold spraying, cold paint, marking machine, marking machine

Background: problem as the mountainous area highway construction scale expands gradually, ensure the safety of the mountainous area highway construction has been more and more important. Due to the mountainous area special geographical environment lead to the curve of the road is very complex, often have large amplitude and uphill. If still adopts the traditional hand push type marking machine for construction will be very hard, not only inefficient, but also can appear some safety problems;

The solution:

Solution to recommend A (hot)

LXD moped

LuXin company in view of the mountainous area construction difficult this difficult problem has developed this can link marking machine has the system of innovation, making it easy for users to use ride. The equipment has to reduce artificial, convenient installation, improve the operation efficiency, etc. In the slope can be no greater than 60 ° mountain stability, guarantee the safety of construction.

Equipment characteristics:

(1) the right side of the device is equipped with high intensity lighting lamps, can be in the case of low visibility construction;

(2) convenient operation of the double pedal system, and the marking machine, only when the link construction control the pedal back can be fast and convenient;

(3) using 5.5 HP Honda petrol engine, the engine small light, reliable performance and easy to start;

(4) brake device, in a larger slope of road construction can guarantee the stability of the equipment;

Energy-saving hydraulic double-cylinder LXD1200 hot kettle

LXD1200 energy-saving kettle is on the basis of the gas tank upgrade, the device adopts the new type of spiral inner barrel insulation device. Using di efficient stoves, gas is mixed with oxygen second, heat faster, more efficient;

Equipment characteristics:

(1) pure blue flame, heating speed;

(2) help oxygen combustion, save gas;

(3) the formation of negative pressure, the gas tank of gas can be fit, make the use of gas well to more cost savings;

(4) between kettle body bravery and cover plate is equipped with insulation board insulation materials;

Senior LXD860 push hot melt marking machine

 Hot melt marking machine is the key to the construction of the hot melt marking equipment, used together with hot-melt kettle, complete line construction. Equipment have legerity, portable, easy to operate, easy maintenance and so on many new characteristics of unique design.

Equipment characteristics:

(1) the use of special manufacturing high-precision one-piece iron line, make sure that all the marking bucket edge of qi, head of qi, uniform thickness, linear and beautiful

(2) special cast iron, heat-resistant rubber wheel, resistance to high temperature and long service life.

(3) glass bead synchronous clutch seeding, compared with a adjustable seeding device on the market spread more evenly;

Cold solution recommended B (paint)

LXD - 18 l trolley load combination type high pressure gas cooling spray marker

Cart carrying dual cold spraying marking machine for high pressure flow type airless spraying machine, this machine use gasoline engine driven single plunger pump, the coating forming high pressure spraying inside the machine, so the line thickness even Angle. Have low Labour intensity, construction convenient, etc.

Equipment characteristics:

(1) adopts hydraulic piston pump design, flow stability failure rate is low;

(2) spray gun rack guide rod design, adjust the width of spraying is accurate, convenient;

(3) the radiator system, can reduce construction of hydraulic oil temperature;

(4) voltage regulation system;

(note: LuXin of moped with my company produces all hands push links the line, convenient and quick installation, greatly improve the efficiency of construction)